Testing & Consultation

Home / Testing & Consultation

Test services provided by BME-BRTC, BUET:

Some of the testing services, including but not limited to, provided by the Dept. of BME, BUET are listed below:

Clinical Test

  • Gait Analysis
  • Implant mechanical strength
  • Automatic eye examination
  • Cornea and pupil diameter measurements
  • Contact lens base curve measurements
  • Optical biometry
  • Advanced measurement of challenging eyes
  • Ultrasound therapy
  • Ultrasound device
  • Thermal analyzer
  • Complete blood count
  • Audiometry
  • Neurological disorders and Neuropsychology (40 channels EEG and EMG machine)

Medical Equipment Functionality Test

  • Dialysis machine
  • Ventilator machine
  • Anesthesia machine
  • CPAP
  • Bi-PAP
  • HFNC
  • Suction machine
  • Vacuum pump
  • ECG
  • Patient monitor
  • Blood pressure machine
  • Oxygen purity

Medical Grade Water Quality

  • Complete dialysis water quality test
  • Endotoxin
  • pH
  • Conductivity
  • Salinity
  • Total coliform
  • Fecal coliform
  • Aluminum
  • Total chlorine
  • Copper
  • Fluoride
  • Lead
  • Nitrate
  • Sulfate
  • Zinc
  • Calcium
  • Magnesium
  • Potassium
  • Sodium
  • Arsenic
  • Chloride

Environmental or Occupational Safety

  • Electromagnetic field strength
  • Air temperature
  • Air pressure
  • Air particulate matter
  • Sound level
  • X-Ray radiation
  • Three phase electrical energy logger
  • EMF RF meter electromagnetic detector

Material Preparation and Characterization

  • Surface morphology and properties (FESEM)
  • Particle structure (FESEM)
  • Bacterial Test
  • FTIR
  • Non-destructive test for micro-structure (micro-CT)
  • Freeze drying
  • Mechanical properties
  • Drying
  • Vortex
  • Liquid viscosity
  • Electro spinning
  • Thin film sample

Hospital Environmental or Occupational Safety

  • UV-C detector (for Corona virus)
  • Electromagnetic field strength
  • Air temperature
  • Air pressure
  • Air particulate matter
  • Sound level
  • X-Ray radiation
  • Three-phase electrical energy logger
  • EMF RF meter electromagnetic detector

Other Tests

  • Fluid pressure
  • Fluid velocity in pipes and rods
  • 3D print of medical grade dental implant
  • 3D print of medical grade other implants
  • 3D print of medical grade accessories

Steps for getting testing services from the BRTC, Dept of BME, BUET are given below:

  1. Submit a letter requesting test services from the Dept. of BME, BUET. The letter has to be submitted to the BME-BRTC Office (Room No.1025, ECE Building), Department of BME, BUET, Dhaka-1215.
  1.   Upon submission of the letter, information regarding the test fee and timeline of test report collection will be provided by BRTC- BME Office, BUET.
  1. For payment of test fee, pay order payable to ‘Director, BRTC, BUET’ has to be deposited to Sonali Bank, BUET Branch.
  1. A copy of the pay order has to be submitted to BME-BRTC Office, BUET. The test procedure will be initiated upon confirmation of receipt of the pay order.
  1. Upon completion of testing and test report finalization, BME-BRTC Office, BUET will contact the client to collect the test report. If requested, BME-BRTC Office, BUET may also courier a sealed copy of the report to the authorized recipient. In this case, a signed authorization letter must be provided in advance.

For any other information, please contact BME-BRTC Office. For detailed contact information, please click here